Have you ever considered creating your own homemade soap, but thought the process was too difficult? Soap making is a skill and an art form that requires knowledge and dedication. If you read up on the soap making procedure and ingredients, not to mention the tools and safety equipment, it makes you want to run the other way.
Don’t worry, with this project you won’t be mixing up any potentially dangerous ingredients in a bucket outside. Thankfully there are plenty of easy homemade soap recipes without having to use lye – no lie;)
I love to DIY personal care products. More often than not it just as simple to whip up amazing lip balms, lotions, scrubs, masks and soaps as it would be to buy them at the store. And making something youself you can use every day is just more fun. You might also save quite a bit of money in the process.
What I am about to show you is much easier than even the easiest cold process soap for beginners. It takes very little time and contains no more than three ingredients! No special tools or combat gear required. It is so simple as a matter of fact, that you might be creating your own recipes soon.
This process works for glycerin, Shea butter and goat milk soap just to mention a few. You can also create your very own custom blend. Let your creativity run free!
If you enjoy creating your own natural personal care products be sure to sign up for my FREE resource library filled with recipes and helpful tips at the bottom of this post!
Why use homemade soap bars instead of shower gel?
We prefer soap at our house over shower gel, because there are no potentially leaky plastic bottles to clog up a landfill later. It’s more economical and practical. With the use of a shower poof you can achieve the same luxurious lather you are accustomed to with shower gel. Soap is also easier for travel as it packs well in a soap caddy and won’t leak in your suitcase.
Why not just buy it at the store?
Good question! In a nutshell: regular store bought soap often contains stuff I don’t want on my kid’s or my own skin. Since this is a product that is used on the entire body pretty much every single day, it’s just better to err on the side of caution, don’t you agree? Sure, there is high quality pre-made soap, but it often comes with a hefty price tag. We deserve the best, but we sure would love to spend the money on something more fun than that, right?
This soap is a snap to make and you can make a whole big batch at one time, enough to last you for a long while. Expecting overnight guests? Surprise them with their very own bar of homemade soap. Or create soaps in smaller sizes as guest soaps.
If you enjoy creating lovely homemade gifts, why not include some soap in a fun shape? Especially with these super cute molds.
*This post includes affiliate links. If you click on an affiliate link this blog may earn a small commission at absolutely no extra cost to you. You can read my full affiliate link policy here.
Are you ready to get started with homemade soap?
The ingredient that makes this process so simple is Melt and Pour soap base. In other words, you don’t have to know how to make soap from scratch, because someone was kind enough to do the hard work for you!
Melt and Pour soap base comes in blocks, usually 1, 2 or 5 lbs. A two pound block is enough for eight 4 oz bars of soap. You can easily order the soap base on Amazon such as this glycerin soap, shea butter soap or goat milk soap. For this time I opted for the Shea butter kind, but it’s really up to you. No matter which Melt and Pour soap base you choose, the process pretty much remains the same.
I have found a limited selection of soap base at craft stores like Hobby Lobby, Michael’s and Joann Fabrics. Be sure to use their 40% off coupons to get the best deal!
You will also need a mold in which to pour the soap. You could use a loaf pan lined with wax or parchment paper then cut the soap once it’s hardened. I prefer silicone molds like this one (shown here with the soap base I chose for this project)
It makes all bars a uniform size and is a snap to clean and reuse. I also use this same mold for other projects. They are not expensive and last a long time. You may even have some silicone molds on hand already.
Or the loaf pan – find an inexpensive one at a thrift shop.
HERE IS THE LIST OF MATERIALS YOU WILL NEED:
- Melt and Pour soap base
- Silicone molds or lined loaf pan
- Pyrex glass bowl
- Essential oils
- Other add ins such as dried herbs (lemon balm, mint, lavender), spices like cardamom, cinnamon, cloves and dried lemon or orange zest, poppy seeds or oats
- popsicle sticks/ wooden stir sticks
- silicone spatula
- potholder to handle hot glass bowl
- find a printable version of this recipe, along with my other health and beauty recipes in my FREE resource library
These are the add-ins I used this time:
And a selection of the essential oils I used.
Set up soap mold(s) on a protected level surface like a kitchen counter covered with newspaper or craft paper. Don’t move silicone molds until the soap is hard! If you need to use your work surface before the soap is hardened, be sure to set the molds on a sturdy tray to allow you to move them.
Have essential oils and other add-ins ready to use. Suggestions for essential oil combos that work well are at the bottom of the post.
Cut soap blocks into 1″ cubes, place in glass bowl. Microwave in 30 second intervals, stirring in between until soap is completely melted. Alternately place glass bowl with soap over a pot with hot water (double boiler) and heat until melted while stirring regularly.
Once the soap base is completely melted, carefully pour it into the molds. Work with one bar at a time, adding oils and add-ins after soap is poured and cooled slightly. Stir soap with popsicle stick after adding oils. Be sure to use a separate popsicle stick for each soap if you’re making different scents. Heavier add ins like oats may settle more towards the bottom of the bar, that is normal.
Let the soap cool completely for at least two hours. Once the soap is cooled and the bars are completely set, gently push each one out of the mold. Wrap the finished bars in wax or parchment paper to store.
Isn’t it so pretty? I wish you could smell it! The lighter dried herbs like mint really distribute well throughout the soap bars.
One fun variation of this soap is adding a little plastic toy to the mold before the soap is poured. My kids used to love washing their hands to get to the little dinosaurs in the soap. This works best with translucent glycerin soap.
Now, wasn’t that easy? Creating your own easy homemade soap is something everyone can do. Don’t you love being able to personalize your own beauty and personal care products with essential oils and other real ingredients? Whip up a batch of soaps every now and then and you have one less item to drag home from the store!
Essential oil combos that work well:
Use a total of 5 drops for each bar. Like: 3 lemon + 2 peppermint
Feel free to experiment with your own combinations and add-ins! The sky is the limit!
To store my lovely leftover ingredients I am using these handy little containers I found at the Dollar Store🙂
Check out some of my other recipes using essential oils!
Now, I hope you go forth and create some of your very own homemade soap!
Come on over and share your result in our Facebook group. We’d love to see it!
For more about The Witty Gritty Life and useful tips *Like* our Facebook Page.
Follow on Instagram to see what I am up to every day and sneak peeks of upcoming projects!
Keep it simple!